Friedrich SQ06 Manual De Instalación Y Funcionamiento página 9

Set Timer: Setting the Stop Time
Press and hold the MIN button (Figure 7) for 3 seconds. The
"OFF" will appear on the display
Press the or button to adjust the hour. Press the TIMER SET button
(Figure 7) to save hour setting and go to minutes. The example below is
showing a stop hour of 11 AM.
Use the or button to adjust the minutes. Press the TIMER SET button
(Figure 7) within 15 seconds to exit and save the setting. The example below
is now set to turn off at 11:55 AM, once the Timer is activated.
The display will return to normal once the settings are saved.
NOTE: Setting the Timer's start and stop times do not activate the timer.
To activate the timer, you must press the
Timer Activated Scenarios
Once the Timer's Start and Stop times have been saved, you can activate
the Timer by pressing the
If the Timer function is activated during the ON time, the Timer
illuminates and the unit will continue to run in the existing mode (system
mode, fan mode, fan speed, set temperature, etc.) until the set OFF time
occurs. See the example below:
AUTO FAN
11
AM
OFF
55
OFF
button.
button..
79
F
SET POINT
When the set OFF time occurs or the Timer function is activated during
the OFF time, the unit will turn off, but the
icon and
as shown below.
To deactivate and shut off the Timer, press the
in the ON or OFF times, the
time, the unit will stay in the current state. If the unit was in an OFF time,
FRR145
the unit will turn back on in the last state operated.
TIMER and PRE-PROGRAMMED SCHEDULING
The TIMER SCHEDULE
24-Hour Timer - System default. (already covered)
Re s i d e n t ial S c h e d u l e (o p t i o n 1) – 4 0 H r. W o r k W e e k :
This option causes your unit to raise temperatures to 85°F during the typical
work day, lower them again to 78°F prior to the time when most people will
return home, and raise slightly to 82°F overnight.
Commercial Schedule (o pt i o n 2) - 5 - Day B usine s s We ek
This option causes your unit to raise temperature to 84°F after typical
working hours and on weekends when commercial spaces are typically
unoccupied.
FRR146
(Refer to Addendum 1 in the back of this manual for both Residential and
Commercial Schedule Tables.)
Timer/Schedule Select
To select between these 3 options, press and hold the
for 3 seconds. You will then be able to toggle between Timer (default),
Residential Schedule (1) and Commercial Schedule (2) by pressing the
or buttons. See below for images of each option.
24-Hour Timer (system default).
icon
FRR159
icon will remain illuminated,
button again. Whether
icon disappears. If the unit was in an ON
has three options:
FRR157
button
FRR139
9