Installing In A Metal Box; Mounting Nut - Amprobe R-115S Manual Del Usaurio

INSTALLING IN A METAL BOX

Installing with a Mounting Nut
Preferred mounting method: Better heat dissipation
• Insert REMCON through the knock-out in gem
box, making sure it does not interfere with the
metal box screw retainers.
• Screw on the mounting nut before connecting
the control wires.
• Be sure to use slip-joint pliers to securely tighten
the nut.
• Make sure there is a good metal-to-metal
contact between the REMCON and the gem box.
SCREW
RETAINER
MOUNTING
NUT
9
METAL BOX
ONLY