Rh/Dp; C/°F; Hold - Fluke Comark N8004 Manual Del Operador

3.2
%RH
DP
Selects direct relative humidity measurement or dewpoint
calculation mode and will be displayed in the main numeric area
of the display.
Relative Humidity Mode:
Dewpoint Mode:
3.3
/
°C
°F
This selects the temperature scale used. This applies to both
ambient temperature and dewpoint temperature depending on
the mode of operation.
3.4

HOLD

Freezes the display with the last measured value. 'HOLD' is
shown on the display. Press the button again to release this
function.
NOTE: Having selected HOLD, it is still possible to scroll the
held values of MAX, MIN and CURRENT temperatures and
to redisplay the temperature scale for any of these. It is also
possible to change to dewpoint mode or RH. Note that the
scale indicated by A in Fig. 4, either °C/°F, has now become
the scale indicator for both the dewpoint temperature and the
ambient air temperature.

%RH/DP

FIG.3
FIG.4
°C/°F
HOLD
A
13