Commencing Operation; Instructions For Assembly Following Transportation - Kunzle & Tasin Bona Scorpion DCS Manual De Funcionamento

Commencing Operation

Instructions for assembly following transportation

To re-assemble the machine after transportation, proceed as follows:
1.
Insert the handle into the side
guides in sequence (A), (B).
3.
5.
Insert the extractor into the basket
holder (A), (B).
10
2.
Tighten the wing knob (A).
4.
Insert the basket holder in its housing on the handle and secure it with the screw knob
(A).
6.
Connect the motor plug to the
socket on the head of the extractor.
Connect the handle/motor
interconnection cable to the socket
on the side of the motor box.
Using the machine when not fully assembled may cause injury or damage to people or objects.
DO NOT use the machine when it is not fully assembled. Keep all fittings tightly closed. Maintain
machine settings in accordance with the specifications.
Bona Scorpion DCS Manual
3.
Insert the rod (A) into the coupling (B) and
lower the tube (C), tightening everything
securely.
4.
7.
Raise the drum with the drum lifting
lever (A), securing it into
its housing.