Routine Maintenance; Sawdust Chamber (For The User); Drums (For The User); Wheels (For The User) - Kunzle & Tasin Bona Scorpion DCS Manual De Funcionamento

Routine Maintenance

To keep the machine in good working condition the following items must be checked and serviced
regularly.

Sawdust chamber (for the user)

Vacuum the
sawdust
chamber
regularly.

Suction unit (for the user)

Check the condition of the fabric
filter regularly and remove any
residue by shaking it gently. The
regular use of disposable paper
bags helps prevent the fabric filter
from becoming clogged.

Belt tension (for the user)

Check the belt tension every 500 hours of operation.
1.
Loosen the screws and remove the belt guard.
3.
Loosen the screw on the back of the machine (A) to
move the motor unit. Moving it forwards loosens the
belt (B), moving it backwards tightens the belt (C).

Drums (for the user)

Check the
outer surface
of the drum (A)
regularly. Remove
any dirt.
2.
Loosen the four screws that secure the motor to the base
frame of the machine (A).
4.
After making the
adjustment, tighten the
clamping screws for the
motor unit (see step 2).
Bona Scorpion DCS Manual

Wheels (for the user)

Dust bag (for the user)

Replace the bag when it is 1/3 full
or when the machine is not to be
used again.
Do not re-use dust bags, use a
new replacement each time.
5.
Put in place again the
belt safety guard (see
step 1).
EN
Remove dirt from the
machine unit and wheels
regularly. Dirt may cause
uneven sanding.
19