Connecting The Power Cord (1) - Pioneer AVIC-F88DAB Manual De Instalación

Ocultar thumbs Ver también para AVIC-F88DAB:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 101
Section
02
Connection

Connecting the power cord (1)

Note
Depending on the types of vehicles, the
function of *2 and *4 may be different. In this
case, be sure to connect *1 to *4 and *3 to *2
as shown in the figure.
ISO connector
Note
In some vehicles, the ISO connector may be divided
into two. In this case, be sure to connect to both
connectors.
8
Engb
*2
*1
*4
*3
Yellow (*2)
Yellow (*1)
Back-up
To terminal supplied with
(or accessory)
power regardless of ignition
switch position.
Red (*3)
Red (*4)
To electric terminal controlled by
Accessory
ignition switch (12 V DC) ON/OFF.
(or back-up)
Orange/white
To lighting switch terminal.
Black (earth)
To vehicle (metal) body.
Connect leads of the
same colour to each other.
Speaker leads
Front left 
White:
White/black: Front left 
Front right 
Grey:
Front right 
Grey/black:
Rear left 
Green:
Green/black: Rear left 
Rear right 
Violet:
Violet/black: Rear right 

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Avic-f80dabAvic-f980dabAvic-f980btAvic-f9880dabAvic-f9880bt

Tabla de contenido