Setting The Temperature; Operating Instructions - Danby DBC434A1BSSDD Manual De Instructions Pare El Uso Y Cuidado De Su Unidad

Centro de bebidas autónomo
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CONTROLS OF YOUR
BEVERAGE CENTER
2
1
1. Indicator light illuminates to signify the
cooling mode is currently in operation.
2. Set Temperature Display: Display screen
shows the temperature setting (see 'Setting
the temperature' below)
3. Cabinet Temperature Display:
Display screen shows the current cabinet
temperature.
4. °C/°F : Adjacent indicator light denotes which
scale of temperature is displayed.
SETTING THE
TEMPERATURE
I M P O R TA N T !
In the event of a power fail-
ure, wait 3 to 5 minutes
before resta r t i n g .

Operating Instructions

3
• To switch the display between the Fahrenheit (°F) and Celsius (°C)
scale, depress the UP
simultanously for approximately five (5) seconds
• The temperature range can be set as low as 39°F (4°C) or as high
as 64°F (18°C) to suit your specific storage requirements. Each
depression of the UP
the temperature in 1° degree increments within the aforementioned
range.
4
5
5. '
' Button: Used to raise the temperature
(warmer) in 1° degree increments.
'
' Button: Used to decrease the
temperature (cooler) in 1° degree increments.
6. '| | ' Switch: Continuous illumination.
'O' Switch: Illumination only when the door is open.
or DOWN
7
6
and DOWN
control buttons
button will allow you to adjust

Publicidad

Tabla de contenido
loading

Tabla de contenido