Fault/Remedy - ADE WS 1703 Instrucciones De Operación

Fault/Remedy

Fault
The DCF77 signal for the
time cannot be received.
The temperature
information of the sensor
seems too high.
Instead of showing the
measured values for
temperature or humidity,
the display shows H.HH or
LL.L.
The temperature indicator
is blinking on the display.
The indicator is illegible, the
function is unclear, or the
values are obviously false.
72
Weather Station with Wireless Outdoor Sensor WS 1703
Possible Cause
‚ Check the chosen
location.
‚ Start the signal
reception manually, if
necessary.
‚ Adjust the time
manually.
‚ Check whether the
sensor has been
exposed to direct
sunlight.
‚ The values lie
above or below the
measurement range.
‚ The temperature alert
has triggered. Press
on ALERT as often
as needed until the
blinking stops.
‚ Reset the weather
station to the original
delivery state.