Lucent Technologies LambdaUnite Manual De Seguridad página 14

...............................................................................................................................................................................................................................................................
1 - 8
• CAUTION: This equipment is designed to permit the connection of
the grounded conductor of the DC supply circuit to the grounding
conductor at the equipment.
a. This equipment shall be connected directly to the DC supply
system grounding electrode conductor or to a bonding jumper
from a grounding terminal bar or bus to which the DC supply
system grounding electrode conductor is connected.
b. This equipment shall be located in the same immediate area
(such as, adjacent cabinets) as any other equipment that has a
connection between the grounded conductor of the same DC
supply circuit and the grounding conductor, and also the point
of grounding of the DC system. The DC system shall not be
grounded elsewhere.
c. The DC supply source is to be located within the same
premises as this equipment.
d. There shall be no switching or disconnection devices in the
grounded circuit conductor between the DC source and the
point of connection of the grounding electrode conductor.
CAUTION
LambdaUnite
access locations! Restricted access locations are controlled
environments where there is no ready access to the general public,
but only to authorized persons who have received adequate
training in laser safety.
®
MSS systems are to be installed in restricted
EN: Safety guide
365-374-138A4
Issue 1, November 2003