Adjustment Precautions - Mi-T-M CM Serie Instrucciones De Operación

IMPORTANT SAFETY WARNINGS

ADJUSTMENT PRECAUTIONS:

1. NEVER alter or modify the equipment, be sure any accessory items and
system components being used will withstand the pressure developed. Use
ONLY genuine Mi-T-M parts for repair of your pressure washer. Failure to
do so can cause hazardous operating conditions and will void warranty.
2. NEVER make adjustments to the machinery while it is connected to the
engine without first removing the ignition cable from spark plug. Turning the
machinery over by hand during adjustment or cleaning might start the engine
and machinery with it, causing serious injury to the operator.
3. Know how to stop the pressure washer and bleed pressures quickly. Be
thoroughly familiar with controls.
4. Before servicing the unit; turn the unit off, relieve the water pressure,
and allow the unit to cool down. Service in a clean, dry, flat area. Block the
wheels to prevent the unit from moving.
5. Follow the maintenance instructions specified in this manual.
! SAVE THESE INSTRUCTIONS !
CM-Direct Driven Operator's Manual 2009 7