Initial Setup; Operation; Storage; Loading The Generator Tank - CEMO DT-Mobil Easy 200l Manual De Instrucciones

GB

4. Initial setup

1. Affix the stickers enclosed with the tank docu-
ments permanently and firmly to the tank.
A
B
Labelling 200 l
A
B
Labelling 430 l
A
B
C
Two-sided labelling 980 l
20
Labelling for the front of the 200 l and 430 l DT
Mobil Easy generator tanks
Two-sided labelling for the 980 l DT Mobil Easy
generator tanks (front and back)
A
UN 1202 for diesel
Hazard label (flame on red
B
background symbol)
Harmful to the environ-
C
ment (dead tree/dead fish
symbol))
2. Fill the tank (see section 5.3). Unscrew cap
from filling connection b. The container is filled
using a delivery nozzle with an automatic shut-
off.
3. Close the filling opening tight using the cap.
► The generator tank is now ready for opera-
tion.

5. Operation

5.1

Storage

Do not expose the DT-Mobil generator tank to
direct sunlight for extended periods, either during
transport or when in storage. Excessive heating
can degrade the quality of the high-grade plastic
container.
If heating produces overpressure in the sealed
container, this overpressure will be released via the
safety valve a.
i
Important!
Do not stack any filled tanks on top of
each other
Suitable storage conditions:
• ambient temperatures from - 10°C to + 40°C
• level surface
• canopy for storage outdoors
• stackability: max. two empty tanks
5.2

Loading the generator tank

Risk of injury!!
The lid must be closed and completely
locked with the two locks f.