Specifications - Shindaiwa HT231 Manual Del Propietario - Operador

Specifications

Model
Engine Type
Engine Bore x Stroke
Engine Displacement
Unit Weight, Less Fuel
Unit Dimensions (LxWxH)
Fuel Tank Capacity
Fuel/oil ratio
Carburetor
Ignition
Spark Plug
Electrode Gap
Torque
Air Cleaner
Muffler Type
Starting Method
Stopping Method
Blade Length
Blade Type
Clutch Type
Gear Type
Gear Lubrication
Standard Equipment
Idle Speed (RPM)
Clutch Engagement Speed (RPM)
Wide Open Throttle (RPM)
Specifications are subject to change without
notice.
Emission Control (exhaust
EPA 2010 and Later and/or C.A.R.B. TIER III
The emission control system for the engine is EM/TWC (Engine Modification and 3-way Catalyst) and for the fuel tank
the Control System is EVAP (Evaporative Emissions) or N (for nylon tank). Evaporative emission may be applicable to
California models only.
Emission Control Label (located on Engine) (EXAMPLE ONLY, information on label varies by FAMILY).
PRODUCT EMISSION DURABILITY (EMISSION COMPLIANCE PERIOD)
The 300 hour emission compliance period is the time span selected by the manufacturer certifying the engine
emissions output meets applicable emissions regulations, provided that approved maintenance procedures are
followed as listed in the Maintenance Section of this manual.
HT231-30
5.9 kg (13.0 lb)
990 x 210 x 210 mm (38.98 x 8.17x8.27 in)
50:1 with *ISO-L-EGD or JASO FD class 2-cycle Mixing Oil
Spark arrestor muffler or spark arrestor muffler with catalyst
740 mm (29.13 in)
Double-blade cutting action: single-edged blade
Rear handle w/integral controls, anti-vibe mountings, front handle w/guard, tool set, blade scabbard.
&
evaporative)
2-cycle, horizontal cylinder, air cooled
32 mm x 28 mm (1.26 in x 1.10 in.)
22.5cc (1.37 in 3 )
1330 x 210 x 210 mm (53.26 x 8.27 x 8.27
0.6 liter/20.3 oz.
Diaphragm type
Fully electronic, transistor controlled
NGK BPMR6A
.65 mm (.026 in)
150-170 kgf • cm / 130-150 in • lbf
Foam element
Recoil type
Slide switch,grounding type
Centrifugal clutch, dry-type
Spur gears
Lithium-based grease
2,750 - 3,000
4,000
11,000 - 13,000
HT231-40
6.4 kg (14.1 lb)
1080 mm (42.52 in)
7