CAPITAL SPORTS Evo Air Manual De Instrucciones página 44

EN
44
1 Attach the saddle (5) to the Saddle Sliding group set (56) with washer
(76) and nylon nut (60), then tighten saddle (5).
2 Slide the saddle and bracket into the vertical saddle support post (4)
and at the desired position, align holes and fix in place with the locking
knob (61) and washer (59).
3 Insert the saddle support post (4) into the main frame (1) and line up
the holes. Secure the saddle in position with the adjusting knob (10).
The correct height for the saddle can be adjusted after the bike is fully
assembled.
Note: Do not exceed the mark "stop".
2