Velleman MML16C Manual De Instrucciones página 3

TIME To select time option. Press PREV or NEXT to select:
(a) SET TIME
(b) SET DATE
(c) ALARM
(d) HOURLY ALARM
(e) 12- HOUR
(f) 24- HOUR
(g) ADD TIME
(h) ADD DATE
(i) OFF TIME
(j) ON TIME
(k) ADD TEMP
SPE ( ALT+TIME) select the display speed of the message from [SPEED 1] (fastest) to [SPEED 8] (slowest)
CLR (in program mode) Erase option. Press PREV or NEXT to select the following options:
(a) DEL ALL
(b) DEL MSG
(c) DEL FILES??
(d) DEL ON/OFF
(e) DEL ALARM
ENT Accept the selected option.
GRA (ALT+1) Select graphic option. See §11 below.
PHR (ALT+2) Select a programmed animation in the message:
MERRY X`MAS [ANIM 1]
HAPPY NEW YEAR [ANIM 2]
4 JULY [ANIM 3]
TH
HAPPY EASTER [ANIM 4]
BEEP (ALT+3) Add a beep sound in the message. (3 possibilities: [BEEP 1], [BEEP 2], [BEEP 3])
5. Password Protection
The MML16C is password protected. In order to program a message, you must key in the correct password.
The default password is "000". When prompted for a password, enter "000" followed by ENT.
To change or reset the password or to disable password security, you are required to enter the program mode:
Step Key to press
1. PROG
2.
000 ENTER
3.
00 ENTER
4.
Press ALT + →
5. Repeat step 3 until you reach the end of the file to make sure you will not modify the file content while doing
password change
6.
CPW
7.
NEXT
8.
NEXT
9.
NEXT
10.
AAA ENTER
11.
AAA ENTER
With this procedure, you have changed the password to AAA.
MML16C
Set the current time.
Set the current date.
Set alarm times and interval. e.g. C: 123M:001 = 123 alarm signals at 1-min interval.
Set the hourly alarm On / Off.
The time will be displayed in 12-hour format.
The time will be displayed in 24-hour format.
Add time screen in display message.
Add date screen in display message.
Turn off the MML16C at the programmed time.
Turn on the MML16C at the programmed time.
No function.
Clear all messages.
Clear the current message.
Delete the specified file (01 to 99) or sequence file (S0 to S9)
Delete the Auto ON/ OFF timer function.
Delete the alarm function.
HAPPY HALLOWEEN [ANIM 5]
DON`T DRINK & DRIVE [ANIM 6]
Explanation
Enter Program mode
Enter default password 000
Enter file 00
Fast shift
Enter password mode
Change password
Change the password to AAA
Confirm the password
NO SMOKING [ANIM 7]
WELCOME [ANIM 8]
- 3 -
MML16C Display
PASSW: ???
OPEN : ??
OLDFIL [CYCLIC]
UNUSE PASS
USE PASS
RES PASS
CHANGE: ***
AGAIN: ***
Content of the data file
VELLEMAN