auna MC-30 DAB Manual De Instrucciones página 44

EN
44
Next track
Press and release the Next button on the Micro System or on the remote
control.
Previous track
Press and release the Previous button on the Micro System or on the remote
control.
Fast forward within a track
Press and hold the Next button on the Micro System or on the remote
control.
Fast backward within a track
Press and hold the Previous button on the Micro System or on the remote
control.
Stop
Press and release the Stop button on the Micro System or on the remote
control.
Programmed play mode
In programmed play mode, you can program the play order of the tracks on
your CD. You can program up to 20 tracks in total.
Note: To set up programmed play mode, the CD must be stopped in the
CD compartment and must not be paused or playing.
1. Press and release the Preset button on the Micro System or press and
release the Prog. button on the remote control to enter CD programmed
play mode. [T01 P00] will be displayed and the two zeros after the 'T'
will flash.
2. Use the Previous/Next buttons on the Micro System or on the remote
control to go to the track number that you would like to program to play
first. Press and release the Menu button on the Micro System or the
Prog. button on the remote control to confirm.
3. [T01 P00] will now be displayed and you can select the second track
that you would like to programme. Continue to select each track as in
Step 2 above, up to a total of 20 tracks.
4. Press and release the Play/Pause button on the Micro System or on the
remote control to play the programmed tracks.
5. To exit programmed play mode, press and release the Stop button
twice on the Micro System or on the remote control.