Bt Mode - auna MC-30 DAB Manual De Instrucciones

EN
46

BT MODE

Check that your Micro System is in BT (BT) mode. If you are not already
in BT mode, press and release the Mode button on the front of the Micro
System or on the remote control until you are in BT mode (check the
display). 'Disconnected' will be displayed, whilst your product searches for
BT devices.
1. 'Disconnected' will be displayed whilst your product searches for BT
devices.
2. On the device that you would like to connect to your Micro System via
BT (e.g. iPhone/ iPad/Android/other phone/Tablet/Computer), turn on
BT connectivity and ensure that it is 'discoverable'.
Note: If necessary, refer to the instructions for your device to add or set
up BT.
3. Select to 'Add new device', if necessary.
Note: Some products will automatically search for a new device and so
the 'Add new device' option is not available.
4. When found, your Micro System will be displayed as 'MC-30'. Select
the device name to begin pairing.
5. When pairing is complete 'BT Connected' will be displayed.
6. Now that you have paired your device with the Micro System, it will
connect to it when it is within range, which is about 10 metres or less
(33 feet or less), line of sight.
7. Your device will remain paired with the Micro System unless you decide
to disconnect or 'unpair' it.
Note: If your device should be come unpaired for any reason, follow the
steps above to 'pair' it again. You can press and release the Pair button
on the remote control to restart the BT pairing process