Setup Menu Setting - Lenco DVP-938 Manual Del Usuario

18.SUBTITLE
Press SUBTITLE repeatedly during playback to hear a different subtitle languages.
19.ANGLE
DVD:Press ANGLE will change the view angle, on DVDs that support this feature.
20.TITLE
Return to DVD title menu.
21.ENTER
Confirms menu selection.
22.SETUP
Accesses or removes setup menu.
23.VOL-
24.REPEAT
Press REPEAT during playback to select a desired repeat mode.
DVD: you can play select repeat chapter/title/off.
CD/VCD: you can select repeat single/all/off.
MP3: you can select repeat single/folder/off.
25.SLOW
Press Slow button repeatedly to enter slow playback, and cycle between different speeds. The speeds are
1/2,1/4,1/8,1/16,and normal.
26.PROGRAM
DVD/VCD:The program function enables you to store your favourite tracks from the disc. Press PROGRAM button ,then
PROGRAM MENU will appear on screen, now you can use the number key to direct input the titles,chapters or tracks
number and select PLAY option. TO resume normal playback, press PROGRAM
and select clear program option on the program menu,press PROGRAM again to exit program menu.
27.ZOOM
DVD/VCD: Use ZOOM to enlarge or shrink the video image.
1.Press ZOOM during playback or still playback to activate the Zoom function. The square frame appears briefly in the
right bottom of the picture.
2. Each press of the ZOOM button changes the TV screen in the following sequence:
2X size->3X size->4X size->1/2 size->1/3 size->1/4 size->normal size
JPEG: Use ZOOM to enlarge or shrink the picture.
1.Press 'ZOOM' .
2,Used " " to enlarge,or " " to shorten the picture.
Use the button to move through the zoomed picture.

SETUP Menu Setting

General Setup Page
Press SETUP button to get the setup menu. Use direction buttons to select the preferred item. After finishing
settings, press
SETUP again to normal display.
The following menu items can be changed:
General Setup Page
8