Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
J "Import from File": enables reading of receiver data from a file (refer to
paragraph 3.5.1).
J "Save changes": enables the user to save modifications applied to a
system datasheet.
As well as the browser bar, this window displays 3 work sections: Client;
System codes; Receivers.
• Client: this enables entry of client data.
• System codes: this enables use of codes to personalise a system by
use of the fields "Installer Code". "Installation Code" and "Altera". These
codes are useful to restrict system management exclusively to those in
possession of the codes. The same code can be used on different sys-
tems or different codes for each system.
During programming of the transmitters and receivers in the series "Nice
Opera", these are programmed automatically with the same codes as set
in the system board, if this board has previously been activated and
contains the set codes.
Note – For more information on use of codes, refer to the manual "Nice
10
Opera System Book".
• Receivers: this section displays the receivers present in a system. To
add or delete receivers, refer to paragraph 3.5.1.
3.5.1 – Adding receivers on a system
In general, to add one or more receivers on a system board, there are two
optional procedures.
• direct mode: this mode requires the condition that the data of the receiver to
be added to a system are already memorised on a file. Then, in the window dis-
playing the system datasheet, click on the function "Import from file" (on the
browser bar) and select the required file.
• indirect mode: This mode envisages the following operations:
- when the software is opened, in the panel "System selection", select one of
the functions "Work on the last system" or "Select or create a system"; other-
wise click on the icon "Systems" on the home page.
– a window is displayed for management of stored systems (fig. 10) which
requires selection of the system on which the receiver is to be added (an exist-
11
ing system or a new version created at the time);
English – 13
Publicidad
Tabla de contenido
