Nice O-Box Instrucciones Y Advertencias Para El Uso página 8

[2] – Indicates the battery status and O-box connection status: in the event of a
connection error, click on this icon for the software to make a new con-
nection to O-Box
[3] – "System selection" panel: on start-up of a work session, enables selec-
tion of the required work mode, to facilitate subsequent selections.
After programming a receiver, to save the configuration data only in its
memory or a file, select the option "Working without creating a system".
Otherwise, after programming a receiver, to save the configuration data
both in its memory or a file, and also in a summarised datasheet of the
system in which the receiver is to be used, select the option "Work on the
last system" or "Select or create a system" (refer to paragraph 3.5.1).
[4] – Indicates access to the operative area for programming of Transmitters.
[5] – Indicates access to the operative area for programming of Receivers.
[6] – Indicates access to the operative area for management of Systems.
[7] – Indicates access to the operative area for software Settings.
[8] – Indicates the pushbutton used to exit the software.
[9] – Indicates the space for the display of data for software personalisation
(user name, etc.).
• Section windows
From the home page, select the section required ("Transmitters", "Receivers",
"Systems", "Settings") and, click on the relative icon to access the selected
section window, to run the required operations. (Note – each section option
can generate one or more windows). These windows normally comprise the
following elements (see fig. 4):
[a] – Browser bar
[b] – Function menu
[c] – Area with general data on device connected
[d] – Programming area
6 – English
(b)
Browser bar items
The Browser bar displayed in each section window enables the user to move
from one window to another and the display of the specific area in which the
user is working.
The typical functions of the browser bar are:
– "Start" = click on this icon to return to the Home page
– "Back" = click on this icon to return to the previous page
– "Next" = click on this icon to go to the next page
– "Help" = click on this icon to display this instruction manual
– "Refresh" = in some windows, this icon can be used to refresh and update all
data.
IMPORTANT – In some windows, in addition to these" standard" functions,
other specific functions may be available regarding the device being pro-
grammed.
(a)
(c)
(d)
4