Mounting The Profile Plate And The Control Console; Cable Connections - Festo MPS 8049013 Manual Del Usuario

Storage station

10.2 Mounting the profile plate and the control console

1
2 (4x)
3
4 (4x)
5 (2x)
6

10.3 Cable connections

50
1
C
A
B
1 Profile plate
2 Hammer head nut, M6-32 (4 ea.)
3 Carrier
4 Socket head screw, M6x10 (4 ea.)
5 Sheet metal screw, 3.5x9 (2 ea.)
6 Control console
1. PLC board to station
If the SysLink 19" system plug
module is used: connect socket A to
2 the SysLink socket on the
C interface using a SysLink cable,
or the SysLink socket at the
station's digital I/O terminal.
2. PLC board to control console
If the SysLink 19" system plug
module is used: using a SysLink
cable, connect socket B to the
SysLink socket on the control
console.
3. PLC board to power supply unit
Insert the 4 mm safety plugs into
the sockets on the power supply
unit.
4. PC to PLC
Connect your PC to the PLC via a
programming cable.
© Festo Didactic 8049748