Symbols On The Unit - Ideal 61-340 Manual De Instrucciones

CAUTION
To protect yourself, think "Safety First":
• Comply with local and national safety codes.
• Use appropriate personal protective equipment such
as face shields, insulating gloves, insulating boots,
and/or insulating mats.
• Before each use:
- Perform a continuity test by touching the test leads
together to verify the functionality of the battery
and test leads.
- Use the 3 Point Safety Method. (1) Verify meter
operation by measuring a known voltage. (2) Apply
meter to circuit under test. (3) Return to the known
live voltage again to ensure proper operation.
• Always work with a partner.

Symbols on the Unit

~
CAT II
CAT III
CAT IV
Test Leads
CAT IV 600V
CAT III 1000V
Risk of Danger. Important Information. See
Manual.
Hazardous voltage. Risk of electrical shock.
Application around and removal from Hazard-
ous Live conductors is permitted.
AC (Alternating Current)
DC (Direct Current)
Earth Ground
Measurement Category II applies to test and
measuring circuits connected directly to utiliza-
tion points (socket outlets and similar points)
of the low-voltage MAINS installation
Measurement Category III applies to measuring
circuits connected to the distribution part of the
building's low-voltage MAINS installation
Measurement Category IV applies to test and
measuring circuits connected at the source of
the building's low-voltage MAINS installation
CAT II 1000V
Guard ring