Auto Power Off; Power On Options - Ideal 61-497 Manual De Instrucciones

Auto Power Off

AUTOTEST
AC
V
RANGE HFR EBTER A-HOLD
DIGIT CANCEL P-HOLD
OFF
Wake-up the meter by switching the rotor or pressing any button.
Auto Backlight
The backlight is automatically turned on in dark environments.
AUTO
K
BUZZER
The meter beeps once for every valid key-press, and beeps twice for
every invalid key-press.

Power On Options

Press the button while turning the meter on from OFF position.
Cancel button : Clear all stored data
Range button : Display LCD test frame
Function button : Default °C / °F reading
HFR button : Display firmware version
A-HOLD button : Disable AUTO BACKLIT
All manuals and user guides at all-guides.com
20min
RANGE HFR EBTER A-HOLD
DIGIT CANCEL P-HOLD
V
AUTO
BACKLIT
AUTO
K
17
Battery and Fuse Replacement
Refer to the following figure to replace the fuse and batteries :
CAUTION
• Use only a fuse with the amperage, interrupt, voltage and speed
rating specified.
• Fuse rating: 440mA,1000V IR 10KA Fuse (size 35 x 10mm)
11A 1000V IR 20KA Fuse (size 38 x 10mm)
• To avoid a false reading, replace the batteries as soon as the low
battery indicator appears.
• 1.5V x 4 alkaline batteries.
Maintenance
Clean the case with a damp cloth and mild detergent. Do not use
abrasives or solvents.
Service and Replacement Parts
No user-serviceable parts.
For replacement parts or to inquire about service information, contact
IDEAL INDUSTRIES, INC. at 1-877-201-9005 or visit our website @
www.testersandmeters.com.
18