Testing And Calibration; Adjusting The Temperature - Toto TBV01406 Manual De Instalación Y Del Propietario

Adjusting the Temperature

To decrease the temperature, turn the
temperature control handle clockwise.
To increase the temperature, turn the
temperature control handle counter-
clockwise.
A safety button is provided to
prevent hot water from spraying out
due to misuse. If the desired water
temperature is above 104ºF(40ºC),
please turn the handle while pressing
down on the safety button.
Adjusting the Maximum Outlet
Temperature
Align the safety button on the
temperature control handle with "104"
on the trim surface.
Turn the water on and confirm if the
outlet temperature is 104ºF(40ºC).
If not, please adjust the water outlet
temperature by following the steps
below:
1. To decrease temperature:
Remove handle cap. Remove
screw and pull handle slowly. Turn
handle counter-clockwise one
notch and reinstall onto cartridge.
To increase temperature:
Remove handle cap. Remove
screw and pull handle slowly. Turn
handle clockwise one notch and
reinstall onto cartridge.
2. Secure handle with screw and
install handle cap.
3. Check water temperature.
** Repeat steps 1-3 if necessary.

TESTING AND CALIBRATION

8
Diverter handle
Hot water side
Cold water side
Safety button
Temperature control handle
Temperature
control handle
Small Screw
Handle cap