Installation Procedure - Toto TBV01406 Manual De Instalación Y Del Propietario

b. Installation: Temperature-con-
trol handle
1. Verify that snap-ring is still
attached and that the opening
on it is facing down.
2. Install handle onto cartridge
and verify that safety button
and "104" mark on panel are
centered.
3. Fasten screws with screwdriver.
4. Place handle cap on.
WARNING:
●Factory setting for water
temperature handle is set
at 104ºF(40ºC).
●Snap ring press fits within
the nut groove.
●Snap ring opening faces
downward.

INSTALLATION PROCEDURE

Temperature control handle
Thermostat cartridge
The opening faces downward
Snap ring stablizes the
functionality of the
temperature control handle,
minimizing unnecessary
vibrations.
Groove
Safety button
Small screw
Handle cap
7
7
Snap ring