Temperature Selection; Interior Light; Leveling Instructions - Danby DAR044XA8BBSL Manual Del Propietário

OPERATING INSTRUCTIONS
THERMOSTAT DIAL AND INTERIOR LIGHT
The thermostat dial and interior light housing are
located on the inner ceiling of the appliance.

TEMPERATURE SELECTION

The temperature of the appliance can be adjusted
by turning the thermostat dial on the ceiling of the
cabinet.
• The thicker, darker part of the dial indicates the
coldest setting.
• The thinner, lighter part of the dial indicates the
warmest setting.
• The "0" position will turn off the cooling
function.
Internal temperature of the appliance can vary
based on ambient temperature, the quantity of items
stored and how frequently the door is opened.

INTERIOR LIGHT

The interior LED light will turn on when the door of
the appliance is opened and will turn off when the
door is closed.
If the interior light burns out, it can be replaced with
a 15 watt bulb. Remove the screw securing the light
cover and then remove the light cover by pulling it
straight down. Replace the light bulb with a 15 watt
appliance bulb and replace the light cover.
Note: The functionality of the appliance is not
affected if the light has burned out.

LEVELING INSTRUCTIONS

There is an adjustable leg on the bottom of the
appliance that can be turned up or down to ensure
that the appliance is level.
1. Turn the leveling leg counter-clockwise as far as
it will go, until the top of the foot is touching the
bottom of the chassis.
2. Slowly turn the leveling leg clockwise until the
appliance is level.
Min
11
0
Max