ENGLISH
The packaging consists of the carton packaging
and wooden pallet. There are symbols printed on
the carton packaging that according to the
international
regulations to follow when loading and unloading,
transporting and storing the appliance.
THIS
SIDE UP
When collecting the goods check if the packaging
is complete and has not been damaged during
transport.
Any damage should be immediately reported to
GB
the shipping company.
8.2.
Installation (service technician)
All the stages of the installation must be carefully
planned.
The location should be equipped with all supply
connections and production waste outlet. The
location should also be properly lit and comply
with all hygiene and sanitary requirements
according to the binding regulations.
The appliance should be installed with the
minimum 10 cm clearance from the wall.
The devices with the oven must be
installed at least 50 cm from the wall.
Locate the device in the horizontal position by
adjusting the individual feet.
agreements
inform
about
CAUTION
KEEP DRY
GLASS
50 10cm
Unpack the appliance as soon as possible to
check if the appliance is not damaged.
Do not use a sharp object to cut the carton box. It
the
may damage the stainless steel inside the box.
Remove the carton packaging from bottom to top.
When unpacked check if the appliance is
according to the order.
In case of any difference inform the sales agent
immediately.
Do
materials (nylon bags, polystyrene foam,
clips ...) in the reach of children!
Remove the protective PVC layer from the out
and inner surfaces. If possible, do not use any
metal tools.
To ensure the correct operation of
the appliance, the appliance must be
installed and operated in the thoroughly
ventilated room only.
When the device is to be installed
near the walls, partitions, kitchen cabinets,
decorative elements, etc., they must be
made from non-flammable materials or
covered with suitable non-flammable
materials.
The device IR091M00 must be fixed to the floor.
12
not
store
the
packaging