Ikegami ISD-A33 Manual De Instrucciones página 21

(3) VIDEO FLIP
Set Video Flip
① OFF: No video flip.
② HORIZ: Flips the image to right or left.
③ VERT: Flips the image up or down. This setting will be required
when you install this unit on a wall.
④ BOTH: Flips the image up and down or right and left.
(4) PRIVACY MASK
Possible to set up to 8 privacy masks.
Move to the Privacy Mask item and
press the SET button to display screen
to the right.
* Note: If the camera ID is displayed
on the same line as the
privacy mask, the mask
becomes transparent. Set so
that the camera ID and mask
do not overlap.
With this screen, make On or Off of the privacy masking and desired
color of masking with PAINT, in three colors, Grey, Black or White.
While the privacy masking ON and
push SET button, an individual setup
screen comes out.
With this screen, eight (8) different
individual masking can be set.
It is possible to press the SET button
and set the mask position and size for
the mask of the numbers set to ON.
● Mask setting procedure
① Move the blue semitransparent cursor to the above left of the
location you wish to mask and press the SET button. (If other
masks are ON, the masks other than the one being set are
displayed as grey semitransparent).
② When the cursor changes to blue, use the UP, DOWN, RIGHT,
LEFT buttons to adjust the size.
Each button is for;
UP
DOWN : Moves a mask bottom line to below (Enlarge height)
RIGHT : Moves a mask bottom line to below (Enlarge height)
LEFT
: Moves a mask bottom line to above (Shrink height)
: Moves a mask bottom line to below (Enlarge height)
E-16
PRIVACY MASK SETUP
→PRIVACY MASK
PAINT
RET
ENABLE MASKS
→MASK 1
MASK 2
MASK 3
MASK 4
MASK 5
MASK 6
MASK 7
MASK 8
RET
OFF
GRAY
ON↓
ON↓
OFF
OFF
OFF
OFF
OFF
OFF