Digital Zoom - Ikegami ISD-A33 Manual De Instrucciones

③ Press the SET button to display the mask section as blue
semitransparent.
If you want to change the mask position, push SET button and
change the screen to a translucent sky blue screen.
If you want to change the mask size, push SET button and change
the screen to a translucent blue screen.
When multiple mask displays are ON, each time the SET button is
pressed for a mask whose display is ON, the selection condition
changes in the following order (masks whose display is OFF are
skipped).
Mask1 Sky blue → Mask1 blue → Mask2 Sky blue → Mask2 blue →
Mask3 Sky blue → Mask3 blue → Mask4 Sky blue and so on.
④ Hold SET button more than 2 seconds, the screen changes to the
Privacy Mask Setting. This process shall be made after finishing
mask setting.

(5) DIGITAL ZOOM

Set the zoom.
① ZOOM : Possible to choose among OFF, 2 magnification, 4
magnification and 8 magnification
② PAN: Move the zoom range to the right or left. Adjust to the desired
position while viewing the screen.
③ TILT: Move the zoom range up or down. Adjust to the desired
position while viewing the screen.
(6) RESOLUTION
Set the resolution.
① NORMAL: This sets the camera to the normal resolution.
② HIGH: This sets the camera to the high resolution.
* If HIGH is selected, the screen may appear to be reduced to a
smaller size. This is not a malfunction.
(7) PROGRES.SCAN
This switches ON or OFF of the progressive scan.
(8) EXIT
Used to save the settings and to quit the menu.
(9) CANCEL
Used to return the settings to the previously saved ones.
(10)RESET
Used to return the settings to the factory ones.
E-17