Focus Ez Function; Screen Displays - Ikegami ISD-A33 Manual De Instrucciones

9. FOCUS EZ function

9-1. Screen Displays

FOCUS EZ is a function to support focus adjustment. A focus indicator
displayed on the screen can be used to confirm the focus conditions. In
case of auto-iris, it is possible to open the lens aperture forcibly for a set
time period to carry out focus adjustment without worrying about field of
depth even in a bright environment during the day. (The camera sensitivity
is adjusted automatically, and there is no influence on the displayed
image).
Press the UP button for two seconds to start FOCUS EZ and go to the
focus adjustment screen.
FOCUS EZ cannot be started in the setup mode.
Focus ideal point
Focus condition
While viewing the focus indicator on the focus adjustment screen, it is
possible to adjust the focus. Displayed on the focus indicator are the focus
ideal point (black) and the present focus condition (light blue). Adjust the
focus so that the focus condition reaches the ideal point.
Pressing the DOWN button once during FOCUS EZ operation terminates
FOCUS EZ.
* The focus ideal point moves with passage of time.
* The focus ideal point may go beyond the point indicated by the focus
indicator. In that case, the focus ideal point returns to the center of the
indicator. This does not indicate a malfunction.
Focus adjustment screen
FOCUS EZ
E-20
Light-measuring
area
Focus indicator