Key Automation 14A Instrucciones Y Advertencias página 29

14
DEAD MAN
GATE OPEN
15
INDICATOR
16
MAINTENANCE
17
MAINTENANCE FLASH
ELECTROLOCK
18
ACTIVATION
WATER HAMMERING
19
IN OPENING
WATER HAMMERING
20
IN CLOSING
MOTOR RELEASE AT
21
STOP
22
START UP BOOST
23
CLOSING DELAY M 1
24
ENCODER
25
ENCODER PULSES
26
DEFAULT
0 = off
1 = on (safety devices disabled)
0 = deactivated
1 = gate open light ON/OFF
2 = gate open light proportional
Service interval cycle threshold
Enabling of continuous flashing when service is required (only
active with gate closed).
0 = off
1 = on
0 = off
Activated for from 1 to 20 seconds when the motors start to open
the gate
From motor M1 closed
0 = off
Motor M1 activated for from 1 to 30 seconds in the closing
direction to ensure that the electric lock releases
From motor M1 closed
0 = off
Motor M1 activated for from 1 to 30 seconds in the closing
direction to ensure that the electric lock engages
Motor release from limit switch. Useful for lightweight gates
0 = off
1 to 10 release levels (1 = minimum release, 10 = maximum
release)
High-speed motor start-up. Useful for heavy gates in winter
0 = off
1 = on
Leaf 1 closing delay with gate open
0 = Off
1 = 1 to 180 Seconds On
1 = Off (use of virtual encoder)
2 = On (use of motor's physical encoder)
1 to 10 pulses per revolution of the physical encoder (only with 24
set as "2")
Restoring the default values
0 0 1
0 0 2
x 1000
10 1 200
cycles
0 0 1
2 0 20 s
0 0 30 s
0 0 30 s
0 0 10
0 0 1
1 0 180 s
1 1 2
1 1 10
0 0 1
EN
29