Areas Of Application; General Description - Parkside PHD 150 A1 Traducción Del Manual De Instrucciones Original

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

GB
MT
Use only original accessories and do
not carry out conversion work on the
equipment.
Please read the notes in the operating
instructions on the topic of "mainte-
nance and cleaning". Any measures
above and beyond these, particularly
opening the equipment, are to be car-
ried out by an electrician. In the case
of repairs, always contact our service
centre.
Electrical safety:
Caution: to avoid accidents and
injuries from electric shocks:
The plug and socket of an extension
cable must be water-tight!
Unsuitable extension cables can
be dangerous as people can be
harmed by an electric shock!
Protect the electric plug connections
against moisture.
If there is a risk of flooding, fix the plug
connections in an area that is safe from
flooding.
Ensure that the mains voltage matches
the specifications on the rating plate.
Connection to the mains must be carried
out by an experienced electrician and
meet the requirements of IEC 60364-1.
The electrical installation shall be ac-
cording to national wiring rules.
The device must only be connected to a
mains socket via a residual-current cir-
cuit breaker (RCD) with a rated leakage
current of not more than 30 mA. Fuse:
at least 6 ampere.
Before each use, check the equipment,
cable and plug for damage.
36
If the power cable for this equipment is
damaged, it must be replaced by the
manufacturer, a customer service agent
of the same or a similarly qualified per-
son in order to prevent hazards.
Do not pull the plug from the socket by
the cable. Protect the cable from heat,
oil and sharp edges.
Do not carry or fix the equipment by the
cable.
Use only extension cables that are pro-
tected from spray water and designed
for outdoor use. Always fully unroll a
cable drum before use. Check the cable
for damage.
Before any work on the equipment, dur-
ing work breaks and in the case of non-
use, remove the plug from the socket.
The cross-section of the power supply
cable must not be less than
2 x 1,5 mm².

Areas of Application

Only use the pressure washer in the follow-
ing private home areas:
To clean machines, vehicles, buildings,
work tools, facades, terraces, gardening
tools, etc. with a high-pressure water
jet.
Only use with original accessories and
spares.
cleaning the object according to its
manufacturer's information.

General Description

The diagram of the most im-
portant functional elements
can be found on the foldout
side.

Publicidad

Tabla de contenido
loading

Tabla de contenido