Candy CMDS 5122WH Manual Del Usuario página 42

6. Remove the screw from the bottom hinge and refit it to the opposite side.
Place the freezer door back on.
7. After placing the freezer door, screw the middle hinge
back onto (the opposite side) the fridge. Ensure the
freezer door is aligned horizontally and vertically, so that
the seals are closed on all sides before finally tightening
the hinge.
8. Place the fridge door back on. Ensure the fridge door is
aligned horizontally and vertically so that the seals are closed on all sides before finally
tightening the top hinge.
a.
b.
9. Put the top cover back and tighten it with the screws. Reverse step 1a to 1c for details
Change the handle（which is the same method for both fridge door and freezer door ）
10.
a.Remove the right bush on the upper door trim, install it to left symmetrical position.
b.Remove two side of plastic hole cover and handle with a screwdriver,
c.fix them on the opposite side. Put the plastic hole cover that were situated where the
handles are presently.
Insert the hinge bracket and screw it to the top of the fridge.
Use a spanner to tighten it if necessary.
42