Kodak esp 3.2 Comience Aquí

all-in-one printer • Imprimante tout-en-un
impresora multifunción
Start Here
Commencez ici
Comience aquí
1K8602
1
Remove all orange
tape, printhead,
and packing
material.
A
Retirez la bande
adhésive orange, la
tête d'impression
et le matériel
d'emballage.
Retire todas las
tapas anaranjadas,
el cabezal de
impresión y el
material de
embalaje.
B
2
1
2
A
1
2
Select Your Language
Press OK
English (U.S.)
English (International)
Deutsch
Français
B
Select Country/Region
Press OK
United States
Canada
Mexico
Brazil
3
A
CLICK!
CLIC!
¡CLIC!
B
4
A
B
OK
D
C
5
A
B
C
6
Choose connection type
Choisissez un type de connexion
Seleccione el tipo de conexión
CLICK!
CLIC!
USB
¡CLIC!
USB
A
OR • OU • O
Follow the online instructions
www.kodak.com/go/aiodownloads
Suivez les instructions en ligne
Siga las indicaciones en línea
B
To connect, you need:
• A wireless router.
• To determine whether your router supports Wi-Fi Protected Setup (WPS).
See your router's documentation.
Connect to a non-WPS wireless router
A
Record your network information:
• Network Name (SSID) __________________________________________
• Security String (case-sensitive) ___________________________________
OK
B
Touch your network name.
If you don't see your network in
the list:
• Make sure your wireless router is
turned on and within range.
• Touch Rescan for Wireless Networks
then touch OK.
• Get help at
www.kodak.com/go/inkjetnetworking.
C
Enter your network password, if
required, then touch OK.
D
When the confirmation message appears, touch OK. The Wi-Fi status light
is on.
NOTE: If you are unable to connect the printer to your network, go to
www.kodak.com/go/inkjetnetworking.
E
Go to
Connect to a WPS wireless router
A
Touch WPS Connect.
B
Select one of the following methods
of connecting.
IMPORTANT: Make sure you know
where the router's
button is, or where to
enter the generated
PIN.
Push Button Configuration
NOTE: You will have two minutes
to press or select the WPS
button. It may be a button
on the device or a virtual
button in the device's
software.
1. Press or select the WPS button
for your wireless router.
2. Touch OK on your printer.
C
When the confirmation message appears, touch OK. The Wi-Fi status light
is on.
NOTE: If you are unable to connect the printer to your network, go to
www.kodak.com/go/inkjetnetworking.
D
Go to
EN
Wizard > OK.
Generate WPS PIN
1. In your wireless router's
software, locate the PIN
screen.
2. Enter the PIN you received on
the LCD into the PIN screen.
3. Touch OK on your printer.