Instructions On Removing Sawdust Generated During Use; Prevention Measures For User; Personal Safety Measures; Compliance With Safety Measures And Warnings - Bona Edge UX Manual De Funcionamiento Y Mantenimiento

Commencing Operation (Cont.)

Instructions on removing sawdust generated during use

Sawdust can ignite spontaneously and cause injury or damage.
It must be disposed of appropriately. Always empty the sawdust
into metal containers which are located outside the building.
Sawdust can ignite spontaneously and cause injury or damage.
Empty the contents of the dust bag when it is 1/3 full. Empty the
dust bag at the end of each machine use. Never leave the dust
bag unattended when it contains sawdust. Do not empty the
contents of the dust bag above a fire.
Prevention Measures for Users

Personal safety measures

Sawdust can spread through the air and be inhaled when
using the sanding machine. Always wear a dust mask of at
least class P2, when using the sanding equipment.
The eyes and/or body may suffer injury if personal safety
clothing is not used. It is advisable to wear safety goggles,
protective clothing during sanding operations.

Compliance with safety measures and warnings

Using the machine when not fully assembled may cause injury or
damage to people or objects. DO NOT use the machine when
it is not fully assembled. Keep all fittings tightly closed. Maintain
machine settings in accordance with the specifications.
Failure to comply with instructions on this machine and in this
manual may cause serious injury and/or damage. Read and
comply with all safety instructions. Ensure that all plates, labels,
warnings and instructions are secured to the machine. New plates
can be obtained from an authorized Bona dealer.
10
Bona Edge UX
For minimized dust environment use a vacuum cleaner
intended for wooden dust.
Lengthy exposure to noise levels during sanding operations
may damage the hearing. Always use approved EN-ISO ear
protectors (earmuffs) during sanding operations.
Injury or damage may occur if maintenance operations or
repairs are carried out by any unauthorized personnel.
Instructions on Correct Machine Use
Read this manual carefully and become familiar with
the machine.
The equipment is suitable for industrial use (e.g. in hotels,
schools, hospitals, offices, factories and shops).
The following information highlights particularly hazardous
situations for the operator and/or machine. Understand when
1) Keep hands and clothes away from rotating parts.
2) Keep hands on the handle when the motor is operating.
3) DO NOT leave the machine unattended when the motor is
operating.
4) Always disconnect the power supply cable from the
machine before performing maintenance.
5) Transport the machine with care, due to the machine
weight.
6) Always use the machine in well-ventilated areas.
7) Always keep the work area well-lit.

Machine Warnings

Prohibited use

Children should be supervised This equipment is not suitable for collecting hazardous dust.
to ensure that they do not
play with the appliance. This Using the machine to move objects or moving on an incline may
machine is not intended for cause injury or damage. The machine must only be used to sand
use by persons (including dry floors which are level or have a maximum incline of 2%. DO
children) with reduced NOT use the machine to sand furniture.
physical, sensory or mental
capabilities, or lack of
experience and knowledge
unless they have received
instructions regarding the
use and are supervised by a
person responsible for their
safety.
Bona Edge UX
these conditions may be present. Removing safety features
could cause death or physical injury. Take all steps necessary
to instruct personnel who may use the machine. Report any
damage on the machine or incorrect operation immediately.
8) Always dispose of the sanding dust appropriately or use a
vacuum cleaner intended for wooden dust.
9) DO NOT detach the dust bag or suction pipe (connecting
the remote vacuum cleaner) when the motor is operating.
10) Always dispose of the sawdust appropriately.
11) Use the type and amount of abrasive specified in the
instruction manual.
12) The use of accessories other than those recommended in
this manual may cause injury.
13) The machine is for indoor use only.
Work surfaces may be
seriously damaged if the
machine is left turning on
one point while the tool is in
contact with the surface. To
avoid damaging the surface
approach the cutting line
carefully. DO NOT stop when
lowering and raising the
equipment, keep moving at
constant speed.
EN
11