Compressor Setup - Pari Trek S Instrucciones De Uso

D. TREK S SETUP
®

COMPRESSOR SETUP

Make sure that power switch is turned "OFF"
With AC Adapter
1. Plug the AC adapter into a polarized wall outlet.
(Fig. A)
2. Plug the other end of the power cord into the power
receptacle on the side of the compressor or optional
rechargeable battery. (Fig. C)
With 12V DC Adapter
NOTE: DO NOT USE WHILE OPERATING A VEHICLE
1. Plug the 12V DC adapter into the vehicle outlet.
(Fig. B)
2. Plug the other end of the adapter into the power
receptacle on the side of the compressor or optional
rechargeable battery. (Fig. C)
With Optional Rechargeable Battery
The PARI Trek ® S Li-Ion rechargeable battery is available
as an option to help maximize your freedom with
portable treatments. Speak with your physician and
homecare company about your daily schedule's needs and
if a rechargeable battery is a good fit for you.
1. Completely charge the battery for the first time before
use. Refer to the "Li-Ion Rechargeable Battery"
section on page 5.
A
C
Compressor Only
2.
.
3.
4.
When the battery is completely discharged all indicator
lights will extinguish and the compressor will shut off.
NOTE: If battery fails to operate, connect the AC adapter into
the wall outlet. Plug the other end of the AC adapter into the
charge receptacle on the side of the rechargeable battery. The
charge indicator should turn "ON" indicating that the battery
has re-set and is now charging. If the charge indicator does
not appear, or if all four indicators are blinking, the battery
has failed and should not be used. Please contact PARI Patient
Connection at 1.800.FAST.NEB (327.8632)
5.
Battery Only
Questions? 1.800.FAST.NEB (327.8632) | PARI.com/TrekS
The rechargeable battery cannot be connected
directly to the PARI Trek
or 12V DC adapter are plugged into the power
receptacle. (Fig. D)
Attach the rechargeable battery to the PARI Trek
by placing the battery onto the rear section of the
compressor and sliding it into place. Ensure battery
is securely locked onto the compressor prior to
operation. (Fig. D)
Use the indicator lights to determine status of the
battery. Refer to "Li-Ion Rechargeable Battery" section
on page 5.
To remove the battery, push and hold the release
button located on the underside of the battery. Slide
the battery away from the compressor. (Fig. E)
B
Battery with Compressor
® S if either the AC adapter
S
®
EN-4