Technical Information - ESYLUX PROTECTOR Operación Manual

GB OPERATING INSTRUCTIONS

TECHNICAL INFORMATION

Model name PROTECTOR Control Panel
Operating voltage 230 V AC, 50 Hz, 0,55 A
Fine-wire fuse T2AL 250V
Standby consumption 11 VA
Power failure rechargeable
12 V , 2.1 Ah
battery
Frequency 868.082 MHz
Transmitting power 10 mW
Antenna λ1/4 with a 50Ω SMA connection, can be replaced with a remote antenna
Radio alarm groups 6 groups of 10 detectors
5, 1 for PROTECTOR MCP only and
Wired alarm groups
4 freely programmable for fire, gas, water, technical alarm, evacuation
Wired alarm group terminator freely programmable to: NC, NO, EOL/NO
Voltage output 2 x 24 V DC, 150 mA with reversible fuse
Relay output 2 x NC/NO, 240 V AC, 10 A
Fault output 1 x NC/NO
Acoustic alarm output 2 x 24 V =, 150 mA with reversible fuse
LED displays 10 collective displays
W 147 mm x H 30 mm, 4-line dot matrix,
LCD screen
back-lit
mini USB socket for programming via the ESYLUX PROTECTOR Programming Tool software
Interfaces
RJ45 socket for PC, LAN, router for remote control, maintenance and programming
Operating temperature range 0° - 40°C
Storage temperature range -10°C - +50°C
Protection type IP20
Protection class I
Colour white, similar to RAL 9010
W 330 mm x H 230 mm x D 73 mm
Dimensions
with spacer: D 82 mm
Weight 1.6 kg
RoHS compliant yes
Product number er10010682
Technical and design features may be subject to change without notice. You can always find up-to-
date product information on the ESYLUX homepage.
NOTE: ESYLUX GmbH hereby declares that the product PROTECTOR Control Panel complies with the basic
requirements and other relevant provisions of Directive 2014/53/EC. The full text of the declaration of
conformity can be found at www.esylux.com.
1304
Protector Control Panel is approved by SIQ notified body number 1304
NOTE: this device must not be disposed of as unsorted household waste. Used devices must be disposed of
correctly. Contact your local town council for more information.
NOTE: used batteries must not be disposed of as unsorted household waste. Used batteries must be recycled
and may be returned free-of-charge to the place of sale. Batteries contain substances which are harmful to
the environment and to human health and must therefore be disposed of correctly.
Defective or damaged batteries should be recycled immediately.
ESYLUX MANUFACTURER'S GUARANTEE
ESYLUX products are tested in accordance with applicable regulations and
manufactured with the utmost care. The guarantor, ESYLUX Deutschland GmbH,
Postfach 1840, D-22908 Ahrensburg, Germany (for Germany) or the relevant ESYLUX
distributor in your country (visit www.esylux.com for a complete overview) provides
a guarantee against manufacturing/material defects in ESYLUX devices for a period of
three years from the date of manufacture.
This guarantee is independent of your legal rights with respect to the seller of the
device.
The guarantee does not apply to natural wear and tear, changes/interference caused
by environmental factors or damage in transit, nor to damage caused as a result of
failure to follow the user or maintenance instructions and/or as a result of improper
installation. Any illuminants or batteries supplied with the device are not covered by
the guarantee.
The guarantee can only be honoured if the device is sent back with the invoice/receipt,
unchanged, packed and with sufficient postage to the guarantor, along with a brief
description of the fault, as soon as a defect has been identified.
If the guarantee claim proves justified, the guarantor will, within a reasonable period,
either repair the device or replace it. The guarantee does not cover further claims; in
particular, the guarantor will not be liable for damages resulting from the device's
defectiveness. If the claim is unfounded (e.g. because the guarantee has expired or the
fault is not covered by the guarantee), then the guarantor may attempt to repair the
device for you for a fee, keeping costs to a minimum.
31