Olivetti d-Copia 1600 Manual De Instrucciones página 18

Caution
DO NOT pull the power cord when removing it from the outlet.
Pulling on the power cord may break the wires and start a fire or
cause an electrical shock. (ALWAYS grasp the power plug when
removing the power cord from the outlet.)
ALWAYS remove the power plug from the outlet when moving
the copier. If the power cord is damaged, there is a danger of fire
or electrical shock.
If the copier will not be used for a short period of time (overnight,
etc.), turn the power switch OFF ( ).
If it will not be used for an extended period of time (vacations,
etc.), remove the power plug from the outlet for safety purposes
during the time the copier is not in use.
HOLD the designated parts only when lifting or moving the
copier.
For safety purposes, always REMOVE the power plug from the
outlet when performing cleaning operations.
If dust accumulates within the copier, there is a danger of fire or
other trouble. It is therefore recommended that you consult with
your service representative in regard to cleaning of internal
parts. This is particularly effective if accomplished prior to
seasons of high humidity. Consult with your service representative in
regard to the cost of cleaning the internal parts of the copier.
DO NOT leave the Document Processor open as there is a
danger of personal injury.
Other precautions
DO NOT place heavy objects on the copier or cause other damage to the
copier.
DO NOT open the front cover, turn off the power switch, or pull out the
power plug during copying.
When lifting or moving the copier, contact your service representative.
Do not touch electrical parts, such as connectors or printed circuit boards.
They could be damaged by static electricity.
DO NOT attempt to perform any operations not explained in this handbook.
CAUTION: Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure.
xii OPERATION GUIDE