Olivetti d-Copia 1600 Manual De Instrucciones página 59

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATION GUIDE
When the original has been set on the
platen and the scanning of the original
completed, Place next original. is
displayed and the 2-Sided Copy display
blinks. When this occurs, carry out the
following procedure.
5
Replace the original with the next one and press [Start].
The copier will scan the original.
6
If there are no more originals to be scanned, press [2-sided] or [OK]. The
copier will begin copying.
2-Sided Copy Reverse Side Rotation Setting
Follow the procedure below to change the rotation setting for the reverse
side when making 2-Sided copies.
1
Press [2-sided] for 3 seconds. The System
Menu for the reverse side setting of 2-Sided
Copies will be displayed.
2
Press
or
and select Rotation On in the case where the reverse side
is to be rotated or Rotation Off when it isn't to be rotated.
3
Press [OK]. The display will blink and the copier will return to the state
where copying can be continued.
Copying Functions
Place next
original.
42.Duplex 2nd
Rotation On
4-5

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

D-copia 2000

Tabla de contenido