Olivetti d-Copia 1600 Manual De Instrucciones página 88

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

System Setting
Text Exposure Adjustment
Processing to Reduce Black Line
Photo Processing
5-12
4
Press
or
and select an exposure from 1 to 7.
5
Press [OK]. The display will return to that of Step 2.
Adjusts the median exposure value of the copy for the Text original.
1
Display the System Menu. (Refer to System Menu Operations
Procedures on page 5-7.)
2
Press
or
to display 10.Text
Density.
3
Press [OK].
4
Press
or
and select an exposure from 1 to 7.
5
Press [OK]. The display will return to that of Step 2.
It is possible to make black line less noticeable when it appears when using
the optional Document Processor. Using processing to reduce black line
decreases the reproduction quality of small characters, so it is
recommended that the copier normally be used at the factory default
setting.
NOTE:
When Photo Mode has been selected in Image Quality Mode,
processing to reduce black line is not possible.
1
Display the System Menu. (Refer to System Menu Operations
Procedures on page 5-7.)
2
Press
or
to display
11.ReduceStreaks.
3
Press [OK].
4
Press
or
and select Off, Weak or Strong.
5
Press [OK]. The display will return to that of Step 2.
Select the processing method for photo originals.
System Menu:
10.Text Density
System Menu:
11.ReduceStreaks
OPERATION GUIDE

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

D-copia 2000

Tabla de contenido