Olivetti d-Copia 1600 Manual De Instrucciones página 92

System Setting
5-16
The setting of Custom Size 1 is shown here as an example. To set Custom
Size 2 select 25.Custom Size 2 in the System Menu and then perform
the same settings.
1
Display the System Menu. (Refer to System Menu Operations
Procedures on page 5-7.)
2 Press or to display the 24.Custom
Size1.
3 Press [OK].
4 Press or and select the size. The paper sizes displayed are as shown
in the table below. When selecting Irregular Sizes, carry out the following
procedure. In the case of the selection of other sizes, proceed to Step 9.
Inch specifications
A3 R
A4 R
A4
A5 R
A6 R
B4 R
B5 R
B5
B6 R
11×15" R
Folio R
Cardstock
Customized Size
5
Press [OK]. The Width can be input after 2 blinks.
6
Press or and input the Length Size.
3.88 to 11.63(")/98 to 297 (mm): The range
in which setting is possible.
7
Press [OK]. The Width can be input after 2 blinks.
System Menu:
24.Custom Size 1
Metric specifications
B5 R
B6 R
A6 R
Cardstock
Ledger R
Legal R
Letter R
Letter
Statement R
Oficio 2
11×15" R
Customized Size
Non-std size L
OPERATION GUIDE
297mm