Before Operating; To Set The Clock; Timer; Stop/Clear - Viking DrawerMicro VMOD241 Manual De Uso Y Cuidado

Before oPeratinG

before operating your new DrawerMicro Oven make sure you read and un-
derstand this Use and Care Guide completely.
• Before the DrawerMicro Oven can be used, follow these steps:
1. Plug in the DrawerMicroOven.
CLEAR
2. Touch the Stop/Clear pad.
3. Set clock.

to Set tHe cLock

1. Touch Timer/Clock pad and number 2.
2. Touch number pads for correct time of day and touch Timer/Clock pad
again.
This is a 12 hour clock. If you attempt to enter an incorrect clock time,
will appear in the display. Touch the Stop/Clear pad and re-enter the time.
• If the electrical power supply to your DrawerMicro Oven should be inter-
rupted, the display will intermittently show
TOUCH CLEAR
this occurs during cooking, the program will be erased. The time of day
will also be erased. Simply touch Stop/Clear pad and reset the clock for
the correct time of day.
note:
• The DrawerMicro Oven can be programmed with the drawer open except
for Start/Add-A-Minute .

timer

1. Touch Timer/Clock pad and number 1.
2. Enter time.
3. Touch Timer/Clock pad again.
To cancel timer, touch Stop/Clear.

StoP/cLear

Touch the Stop/Clear pad to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Stop the DrawerMicro Oven temporarily during timed cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice for timed cooking.
E
AND TOUCH
AND TOUCH
ENJOY YOUR
will appear.
CLOCK
will appear.
:
ENJOY
after the power is reinstated. If
CLOCK
14
MICRO- WAVE
YOUR MICRO-
TOUCH
ERROR
WAVE