Descaling - Saeco Odea Giro Manual De Uso Y Mantenimiento

DESCALING

When performing a descaling cycle, it is necessary to be present during the entire process
(about 40 minutes).
Caution! Do not use vinegar as a descaler.
The descaling must be done when indicated by the machine. Use a non-toxic, non-harmful descaling
solution. Saeco descaling solution is recommended.
The used solution should be disposed according to the manufacturer instructions and/or regulations in the
country of use.
Note: before starting a descaling cycle make sure that:
1 a container of adequate size is available;
2 if the "Aqua Prima" fi lter is used, make sure that it has been removed.
1
When the descaling light is
fl ashing, a descaling cycle must
be performed.
4
Press the hot water button.
2
Empty the tank and refi ll it,
dissolving the descaling solution
in a full tank of water.
5
Turn the knob until the
position is reached. Dispense
the descaling solution into the
container for 15 seconds.
DESCALING
3
Place a large container beneath
the steam spout.
6
Turn the knob until it is in the
rest position ( ).
15