Parkside PFBS 160 B2 Traducción Del Manual De Instrucciones Original página 70

Application examples/selecting a suitable tool:
Function
Drilling
Milling
Engraving
Polishing, rust removal
CAUTION!
Exert only a light pres-
sure when applying the
tool to the workpiece .
Cleaning
Grinding
Cutting
■ Note that the maximum diameter of the grinding assembly and of grinding cones, pencil grinders and
grinding points with a thread insert may not exceed 55 mm and the maximum diameter for sandpaper
sanding accessories may not exceed 80 mm .
NOTE
► The max . permissible length of a mandrel is 33 mm .
■ Store the accessories in the original box or store the accessory components somewhere else to protect
them from damage .
■ Store the accessories somewhere dry and not in the vicinity of aggressive media .
■ If you exert too much pressure, the fitted tool can break and/or the workpiece could be damaged .
You will achieve optimum working results by moving the tool over the workpiece at a steady speed
and while exerting light pressure .
■ When carrying out cutting work, hold the appliance firmly with both hands .
■ Observe the data and the information in the table to prevent the end of the spindle from touching the
perforated base of the grinding tool .
PFBS 160 B2
Accessories
Drill bit
Milling bits
Engraving bits
Metal brush
Polishing
attachments
Synthetic brushes
Grinding discs
Grinding bits
Abrasive belts
Cutting discs
Use
Working wood
Various jobs; e .g . creating
recesses, hollows, forms,
grooves or slits
Labelling, handicrafts
rust removal
Various metals and plastics,
especially precious metals
such as gold and silver
e .g . cleaning hard-to-access
plastic housings or the area
around a door lock
Grinding work on stone,
wood, fine work on hard
materials such as ceramics
or alloyed steel
Working metal, plastic and
wood
Protrusion
(min–max) mm
18–25, using the
smallest drill, the
protrusion is 10 mm
18–25
18–25
9–15
12–18
9–15
12–18
10
10
12–18
GB │ MT │ 67 ■