Changing Battery - Chauvin Arnoux C.A 822 Manual De Funcionamiento

5. MAINTENANCE
5.1.

Changing battery

When the low battery symbol appears on the screen, you
should change the battery.
- Remove the protective covering
- Unscrew and remove the battery cover
- Insert a 9V battery
- Screw the cover back into place
- Replace the protective covering
5.2. Cleaning
Clean the casing with a cloth and a little soapy water.
Clean off with a damp cloth.
Do not use any solvents.
5.3. Metrologic verification
It is essential that all measuring instruments are regularly
calibrated.
For checking and calibration of your instrument, please contact
our accredited laboratories (list on request) or the Chauvin-
Arnoux subsidiary or Agent in your country.
5.4. Repairs
- Repairs under guarantee and outside guarantee.
Please return the product to your distributor.
6. TO ORDER
C.A 822 ................................................................. P01.1731.02
Supplied with a shockproof case, a 9V battery and these operating
instructions.
Spare parts :
9V battery ............................................................. P01.1007.32
13