Ingersoll Rand 88S Serie Manual De Operación Y Mantenimiento página 15

PART NUMBER FOR ORDERING
46 Sanding Pad Assembly
with 5" Sanding Pad . . . . . . . . . . . . . . . . 77A–AM825–5
with 7" Sanding Pad (medium) . . . . . . . . 77A–AM825–7
with 7" Sanding Pad (firm) . . . . . . . . . . . 77A–BM825–7
with 9" Sanding Pad . . . . . . . . . . . . . . . . 77A–AM825–9
47 Pad Mounting Kit . . . . . . . . . . . . . . . . . . . . . . . . 77A–826
* Piped–Away Exhaust Kit . . . . . . . . . . . . . . . . . . . . . . 88V60–K184
* Exhaust Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99V60–184
* Exhaust Hose Clamp . . . . . . . . . . . . . . . . . . . . . . DG30–67
* Exhaust Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . 88V60–167
* Exhaust Elbow Gasket . . . . . . . . . . . . . . . . . . . . . 99V60–49
* Exhaust Elbow Screw (3) . . . . . . . . . . . . . . . . . . FEA100–112
* Exhaust Hose Band Assembly . . . . . . . . . . . . . . . 99V60–A927
* Exhaust Hose Band (4) . . . . . . . . . . . . . . . . . 99V60–927
* Exhaust Hose Band Screw (4) . . . . . . . . . . . . MT1–36–7/8
* Screw (2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . JC3350–103
* Exhaust Hose Band Nut (6) . . . . . . . . . . . . . . G8–120A
* Not illustrated.
PART NUMBER FOR ORDERING
48 Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
49 Wrench (double end 5/8" x 3/4" . . . . . . . . . . . . . . . DG120–69
* Controller Wrench (for removing or installing
the Controller Assembly) . . . . . . . . . . . . . . . . . . . . . 88V60–950
* Seal Pressing Tool (for pressing off the Controller
Assembly from the Rear Rotor Bearing) . . . . . . . . . 99V60–951
* Bearing Clamp (for clamping the outer race of
Rear Rotor Bearing to release the Controller) . . . . 99V60–A952
* Controller Maintenance Kit (includes
88V60–950, 99V60–951 and 99V60–A952) . . . . . . 88V60–K950
* Tune–up Kit (includes illustrated parts 3 [2],
5, 6, 8, 9, 32, 36, 40 and 42) . . . . . . . . . . . . . . . . . . 88V/88H–TK3
AG230–26M