Placing Tool In Service; How To Order A Sander - Ingersoll Rand 88S Serie Manual De Operación Y Mantenimiento

LUBRICATION
Ingersoll–Rand No. 50
Always use an air line lubricator with these tools.
We recommend the following Filter–Lubricator–Regulator
Unit:
For USA – No. C22–04–G00
Before starting the tool, unless the air line lubricator is used,
detach the air hose and inject about 1.5 cc of oil into the air
inlet.
Model
88S45W109
88S60W107

PLACING TOOL IN SERVICE

HOW TO ORDER A SANDER

VERTICAL DISK WHEEL SANDER
Free Speed, rpm
4,500
6,000
3
MAIN LINES 3 TIMES
AIR TOOL INLET SIZE
TO
AIR
SYSTEM
TO
AIR
TOOL
LUBRICATOR
FILTER
REGULATOR
BRANCH LINE 2 TIMES
AIR TOOL INLET SIZE
DRAIN REGULARLY
Spindle and Back Up Pad
COMPRESSOR
(Dwg. TPD905–1)
5/8–11, 9"
5/8–11, 7"