Starting The Robot - Amibot Swip AS50 EVERYBOT Manual Del Usuario

EN
Operating the robot
Inserting the water tanks
Insert the two water tanks into the compartments on the underside
of the robot. Once inserted, the water tanks must be able to rotate
freely. The robot is ready to start its cleaning cycle.
NOTES:
• Check that the water tanks are attached to the robot correctly. For optimum
performance, never cover the edge detectors.
• Do not use the robot on rugs or carpets.
• The water tanks must be removed from the robot before it is charged.

Starting the robot

Figure 1
Once the water tanks are inserted,
switch the robot on using the
power button on the underside
of the appliance (Figure 1). The

robot beeps several times and
the Start/Stop button turns blue.
Turn the robot over and place it
on the floor.
8
