Operation - Snip (Sniff Nasal Inspiratory Pressure) - CareFusion MicroRPM Manual De Funcionamiento

To repeat either the PImax or PEmax tests the MicroRPM must firstly
be returned to the 'Off' position.
Operation – SNIP (Sniff Nasal Inspiratory
Pressure)
Insert the battery into the rear of the MicroRPM.
Fit the Nasal Probe Adapter into the MicroRPM and then attach the
correct size Nasal Probe, as shown below.
The correct size (1-4) can be ascertained by fitting a Nasal Probe to
the unit, then firmly inserting the Nasal Probe into a nostril. Instruct
the subject to block the open nostril with a finger and then to attempt
a sniff. The correct Nasal Probe size has been selected once there is
no leakage around the Nasal Probe.
2
N a s a l p r o b e
N a s a l p l u g
a d a p t e r
M i c r o c o m p u t e r u n i t
11