Alternative 1
–
Tighten the spring to the specified measurement by tur-
ning adjusting ring
Guideline
Hook wrench (T304)
Alternative 2
Warning
501149-01
Danger of accident Modifications to the suspen-
sion setting may seriously alter the handling cha-
racteristic.
Extreme modifications to the suspension setting
may cause a serious deterioration in the handling
characteristic and overload components.
–
–
–
Adjust the spring to the value determined when it was
removed by turning adjusting ring
Hook wrench (T304)
–
Tighten retaining ring
Final steps
–
Install the shock absorber (see Owner's Manual).
–
Remove the motorcycle from the lift stand (see Owner's
Manual).
fs
.
Only make adjustments within the recommen-
ded range.
Ride slowly to start with after making adjust-
ments to get the feel of the new handling cha-
racteristic.
fs
.
ft
.
ASSEMBLY 5
21