Playcore Swing-N-Slide PB 8233 Instrucciones De Montaje página 30

Assembly Plan
Fig. 23
6''
12''
(4)
2-1/2'' screws
12''
6''
2-1/2'' screw
Cliff Climber Installation.
1. Attach Support Board as shown in
(Fig. 23).
2. Attach Cliff Climber to tower at the 5
locations where holes are drilled through
the Cliff Climber on the side & top as
shown in (Fig. 23a).
3. Attach Cliff Climber to the bottom rail
through 3 holes in the bottom lip as
shown in (Fig. 23a).
Fig. 23a
(3)
2'' Lag screws
(3)
1-1/4'' Lag screws
2'' Lag screw
30
(2)
1-1/4'' Lag screws
1-1/4'' Lag screw